Safety Tips: Pay attention to safely re-holster your handgun

Drawing your gun when danger looms is quite exciting and fun in a way, but reholstering can be more dangerous if you are not careful enough to follow the rules. Although holstering may not be particularly exciting, it is most important to be guarded as taking it for granted equals a self-inflicted injury.

I could remember a scene I witnessed a long time ago. There was a breakdown of order in my neighborhood which caused many people to lose their lives while severely injured. Police and citizens exchanged shots at each other for a long while before things were called to order. 

After the events went down, a police officer wanted to re-holster his handgun, but out of impatience or what I called negligence, he mistakenly pressed the trigger, and that was it; his left thigh was torn apart.

Imagine the pains and regrets because of an unintended mistake.

You need to carefully consider how and when to holster a gun back if you carry one. Knowing when to re-holster a pistol is quite simple. When you are sure there is no danger in your environment, or there cannot be an emergency any time soon; then, it is the right time to put your gun back to the holster. This idea is particularly effective if you just used your firearm for self-defense or someone else, and you are sure the police are responding to the situation already.

It is only fair that you conceal your handgun before the police arrive because if the firearm is still in your hand when the police arrived, you might sure be creating an unfavorable scene for yourself as you can be tagged as a perpetrator, hence the need to holster the gun back to avoid this tragedy once you are sure there is no imminent hazard. 

Here are the safety tips to re-holstering your firearm:

The Easy way

To prevent putting a hole through your leg, you must know the easy way to holster. It would help if you were sure the gun is safe while it goes back to the holster. Your finger should be entirely out of the trigger since keeping your finger on the trigger might mistakenly press it, thereby giving a blow-up.

There is no benefit whatsoever in rushing or stuffing your gun into the holster without adequate procedure; you will only be digging a deep hole in your body. It is only crucial that you take your time to holster your firearm correctly.

Thick fabrics can also cause an accident during holstering so clear the holster path before the steps.

Proper grip

For good reasons, it is best to hold your pistol in a proper shooting grip with your trigger finger positioned along with the frame. In contrast, your other three fingers stay on the grip under the trigger guard right from the moment you clutch your pistol till it is secured in the safest posture.

This gives you better control when drawing, shooting, and holstering your gun. If your holster does not stay firm when you draw your gun, there are two things to do.

  • You either check your holster before inputting your gun or
  • You remove the holster from your waistband( IWB or OWB) to re-holst it.

You should follow the above process if you use an elastic holster that depends on traction to maintain its space and holsters covering the handgun’s trigger guard alone.

A renowned Singleton of Singleton International instructor once said, “If you are not certain your world is safe, you should not consider using holstering.”

Knowing fully well that your world is safe, why don’t you take a second to lock your pistol into the holster while at the same time ensuring your concealing garment does not hinder the process, then make sure your fingers are off the trigger?

This careful but straightforward act could save you from an unintentional discharge that may cost you your life if care is not taken.

Good positioning

Yank the pistol close to your body into a retention posture to have absolute control over it. After you would have checked your front for another menace, now check behind you again to be sure you are entirely safe. You can use this time to check if you need to reload.

Safety on

Activate your handgun safety if it has one and put your thumb pressure on the safety while pushing it gently in its secure path. Do this until your firearm is in the holster or there is a need to fire again.


Now is the time to rotate the muzzle to 90 degrees so that it points to the ground. Take your finger off the trigger guard to keep thumb pressure against the safety. 

This action is necessary to avoid accidental discharge, which may cause you to be imbalanced for life.

Retention strap

Initiate a retention strap if your holster got one after releasing your pistol. Avoid the mistake of using your support hand to assist in holstering when the gun is yet to be correctly placed in the holster. Some shooters make that mistake. You should not because it is synonymous with losing your fine toe, If not all.

Balance checking

After safely holstering your handgun, the next thing is to check for balancing on every angle. Walk back and forth to feel the comfortability and to also ensure proper holstering. You can also sit to check out the position while sitting.

Also, get a friend to check for the concealability while walking to ensure it is not exposed from behind.


After safely holstering your firearm, you can now enjoy life and merry. Holstering should be a controlled and conscious action and not banging without caution, except you want to pity yourself. Above all, move slowly and safely; the speed rate you used to bring out your handgun should be different when holstering it back. A close shot at your thigh, leg, or foot can get ravaging results in which the scar will remain for life.

Irons Sights and Red Dots on a Rifle: Which is the best?

In this article we’re gonna go for red dots versus your iron sights on your rifle and we’ll see which one is the best choice for you.

You’ll know that I’m a big advocate of technique / technology, I think proper technique is the way to go. I think it’s the way to begin and I also think that it’s the way to sustain yourself. Am i against red dots on rifles? No absolutely not, I’ve got red dots on some of my rifles on a lot of my rifles though I simply have iron sights just like this this rifle below.

This is my predominant practice rifle, I’ve been working this one for a while. Now I’ve got a few thousand rounds this with just iron sights and I’ve been focusing on my technique. I’m a big proponent of technique, technique is going to be superior over technology and things. The argument with a red dot of course is that, it’s so much faster at close distances and it’s more accurate at farther distances well,

This is a $500 AR-15 rifle with red dot mounted, a Smith & Wesson M&P 15. There’s nothing special about it, I like it and it’s been great, it’s been reliable, it works well for me.

It’s not an endorsement of Smith & Wesson, it’s just the fact that I got a rifle for $500 that I could beat the crap out of and do demos in front of students and also practice in my spare time . At 7 yards, this is typical room distance in your house if you think about that this could be a hallway engagement this could be a room engagement , so what we’re looking at here on this valor Ridge target is that we’re gonna look at his nice clean thing and there’s not a bullet hole on there.

I’ve got my timer, so we’re gonna see what the time difference is between an iron sighted rifle in this red dot one. I’m gonna utilize the same technique for both and I’m gonna show you the time after each shot as I said clean target. Let’s work proper technique here, so as you’re gonna see at all it starts with your stance, I’m a big proponent in that also starts with your buttstock placement, in your shoulder, if it’s different every time.

If you keep moving, you’re gonna be searching for it so keep that buttstock in the same part of your shoulder each and every time I don’t change this whether I’m running slick or running body armor, it doesn’t matter it stays the same for me.

Once again hand placement stays the same when I’m standing, it stays the same when I’m in a kneeling position and it would stay the same if I was in the prone position. I’m not getting down prone, I’ve been have my legs are tired anyway but it’s this stays the same so consistency guys . As I said that I’m gonna get some good shots into this guy at the 7-yard mark or you can even do this closer if we wanted to, the argument is that the red dot is faster up close , I don’t know, let’s see if that’s true or not. I’m gonna put this on the timer using consistent technique, I’m going to put these rounds right where they need to go and I’ll show you an example of each challenge position that was in point seven and I took my absolute time on doing that.

That’s right in the center of the spine boxes you can see that right there, so that’s in less than a second, I don’t know how much faster that you would want to do something in a home defense situation. If I did it again it would be just as fast if not faster I deliberately took my time on that one to make sure is dead center. Let’s see if we can pick that up same right there. Point seven four just a little bit quicker but not much so we’re talking three-quarters of a second, I can push that even faster if I just wanted to keep it in the circle but I want some good spine box hits.

Let’s check out the red dot. What I’ve got here is a red dot sight that’s the aim point t one. Everybody knows that’s my favorite red dot and I’m gonna see if there’s a difference. I’m gonna try to put it in the center of the spine box as well, so the red dot is on and as you can see my rear side has folded out of the way like I like it. I’m gonna use the red dot to see if there’s any different same technique. That’s a point eight and I took my time made sure is dead center, let me give you one more so that we can get an aggregate once again right on the money point eight.

So for me the technique is that the iron sights and the red dot are about the same in fact. I was a little bit quicker on my iron sights so not much of a difference, I don’t think a tenth of a second has anything to write home about and as you can cheat this target, these rounds are all dead center.

The spine box that’s nice and high on the spine box but every single one of them right in the middle of the spine box, these are good hits at 7 yards, if I move up to 5 yards this is gonna be even faster and that’s a typical room size engagement, so the other argument is that red dots can be a little bit more accurate at distance well.

Some guys shoot iron sights great at distance others shoot red dots better, it’s gonna be up to you but I’m gonna show you that you can get the job done with either one. I’m gonna just do a three round group here at 200 yards on the C’s own steel is what that is. So I’m gonna get in position get my natural point of aim and just do some good shots with this iron sighted rifle and it’ll be on the orange target. Shooting with the red dot on the sky-blue or for you guys out there that were born after the 1980s powder blue, so this target like I said not my best group. If you can see it’s right like you guys in California and Hawaii are like jumping up right now is in heck but that’s literally what we’re looking at. So just to give you a perspective that group is this big ,this is an example of a bad position gear won’t make up for a bad position whether you run an iron sights, red dots variable, power optic, it doesn’t matter.

So if you’re shooting and you have a bad position you can expect for it to string out like this. You wil see this is bad for me, if I have a group like that that’s bad so this target is from earlier today with the iron sights. When I shot those iron sights , I had a good locked in position, I had a good natural point of aim and that’s what you’re looking at right there, that’s the group that was being shot but this one that’s what I’m used to with a good position so as you can see the iron sights better than even the red dot was alright on this group much better. About this size group as you can see that’s what I’m used to shooting at this kind of distance and that’s a good position that felt much tighter for me. It felt like the sights were coming right back into recoil .

So just to iterate, it doesn’t matter what you’re running on your rifle, if you have proper technique proper mechanics proper fundamentals you’re gonna do good shooting regardless of what you’re using . It’s the technique as the old adage goes, it’s the India not the arrow.

I go over a lot of these concepts in my American Rifleman book and that’s available, I’ve got that in the description box below these crazy times, it’s always a good idea to know how to shoot your rifle.


There are plenty of ideas to take into consideration for vision scope. On the other hand, they have been sophisticated. The optimal method to solve this issue would be to split it into small fundamental elements that help you gain a deeper understanding of it. We believe that you will select the best one that fits you a lot. Let’s follow us to raise awareness about this scope below.  


Before jumping into the world of night vision equipments, we prose all three factors which are seen as the essential elements for your scope. All of them are the pictures, range as well as gain. Moreover, the crucial ones could identify the influence of factors above, which transform significantly from the older generation to the others as well. Last but not least, finding out about them is beneficial for you to approach your device conveniently one day.         

The range of night vision scope     

Since night vision scopes rely upon red lighting. Thus, some people will choose to take the most advantage of projectors, which is intangible for your lovely eyes. The others respond to ambient light. However, it does not work effectively in some cases. No matter what is the origin of light, this IR will control the limited range which it could convey to brightness.   

The distance of this scope could be partially regulated for the level of sensitiveness of light. However, it can not take effect in some cases. Compared to a flashlight, the light can fade to the shadow with the availability of range as well. Moreover, IR light could do it very well and sharply.

Besides, this night vision scope can take control of the light from the spectrum. In this article, we won’t go farther more about the characteristics of light.

The gain of night vision scope

The range could cope with the external lighting effects. The other element in this scope is gain. This is an area which brings the dim spread over 60 yards range and make it change to the bright light for people to experience. The quantity of the rise is that gain. However, it is tricky for you to understand its specifications because it is a part of the technical field.

Nevertheless, it is critical to raise awareness about how effectively your scope will keep working, particularly for at night or even the goals that signify less IR lighting. In other words, the greater scopes gain are contradicted to both landscape and goals as well.

At this moment, some questions are put like why don’t you possess the amount of high gain for your night vision scopes at all? The answer is that they may be sensitive when they clean or wash, and everything will be blurry as well. Besides, several shooters specialize in some gain, which they want to grab for serving their purposes. Therefore, it assists me in record my night vision as well as offering the edge if possible.  


When we discuss more about the quality of the pictures, it must complete with brightness, clarity, and comparison, which all stuff originates from the general appearance of lenses along with any solutions they need to possess. Besides, with the assistance of this vision scope, the resolution will be the first issue to discuss. There is a big range of it which may have some impact on the visual quality, compared to other modern TV and old television.  

Obviously, this picture quality is changed by the gain as well as a range which control the brightness of the picture.        


At this time, there are a lot of night vision scopes without magnification as well. As you know previously, The advantage of night vision scope is to experience in the shadow. Besides, increasing the high degrees of magnification will make your gadget more difficult to use. Some people claim that some scopes can provide low degrees of magnification, which is nearer the actual vision scope.

As usual, the high ones are the cutting edge gadget, which is installed firstly, and its picture can be affected by the high magnification as well. In this case, we highly recommend that you should go with the ranges that you can determine for a night scope. Moreover, there is no need to choose the higher levels with boost up more than a minimal level of magnification.  


After scanning through all about some elements above, we make sure that you will raise a lot of awareness about the night vision scope. The first essential thing to consider is IR light. On the other hand, this IR light is the most crucial thing which can make your scopes operate effectively.

The other factor of this night scope you need to care about is the recording function. It is very simple to use, like switching on the recording mode on your mobile phone or other gadgets.